Bissell 25A3 User Manual download pdf (Page 16)

Troubleshooting

AwARNING:

To reduce the risk of fire, electric

shock or injury, unplug from the

outlet before servicing.

Heat indicator light does not illuminate

Possible Causes

1. The heater switch is not turned on.

2.

The machine power switch is not

turned on.

Reduced spray OR no spray

Possible cause

1. Biadder may be empty.

2.

2-in-1 tank may not be seated properiy.

3.

Pump may have iost prime.

4.

The pump beit may be broken.

Remedies

1. Turn on the heater switch iocated on

side of unit

2.

Both switches must be on

to activate the heat indicator iight

Remedies

1. Turn power switch ofi Refill bladder

with clean hot tap water and formula.

2.

Turn power switch off; remove tank

and reseat tanks.

3.

Turn power switch off; after 1 minute

turn on and depress spray release trigger.

4.

Turn power switch off and unplug

from the outlet To check if a pump belt has

broken, you will need a flat head

screwdriver.

A.

Insert the blade end into the slot of the

belt access door to release. Examine the

belt for breakage. You should be able to see

the pump belt looped around the motor shaft.

If it is broken or missing, please refer to

Replacement Parts on page 18.

A replacement belt may be ordered at

www.bissell.com or by calling BISSELL

Consumer Services at 800-237-7691.

Complete installation instructicris

will accompany the replacement belt

B.

When replacing belt access door be sure to

line up slots of belt access door with slots in

machine, slide door into place and snap shut

Pump Belt

16

WWW, b isse M ,c0m

80 0,2 3 7,769 1

ug120-4078_25A3_908.indd 16 10/14/08 1:21:09 PM

1 2 ... 11 12 13 14 15 16 17 18 19 20

Comments to this Manuals

No comments