Bissell POWERFORCE 71Y7 User's Guide download pdf (Page 13)

Vacuum cleaner won’t turn on

Possible causes Remedies

1. Power cord not firmly plugged in 1. Check electrical plug

2. Blown fuse/tripped breaker 2. Check/replace fuse or reset breaker.

Vacuum cleaner won't pick up dirt

Possible causes Remedies

1. Incorrect height adjustment 1. Adjust powerfoot to correct height setting

2. Hose not attached to suction opening 2. Grasp hose grip and firmly push onto the base

3. Twist 'n Snap hose not securely attached 3. Make sure Twist 'n Snap hose is snapped

into position

4. Dust bag is full 4. Replace with new dust bag

5. Rotating floor brush bristles worn 5. Replace brush

6. Rotating floor brush jammed 6. Remove brush and clean debris from

brush ends

7. Clog in vacuum 7. Follow instructions for clearing clogs on page 11

Tools won't pick up dirt

Possible causes Remedies

1. Crack or hole in hose 1. Replace hose

2. Vacuum hose, wand or tools clogged 2. Follow instructions for clearing clogs

Vacuum cleaner difficult to push

Possible causes Remedies

1. Incorrect height adjustment 1. Turn floor surface selector to next

highest setting

2. Rotating floor brush not rotating 2. Check drive belt and brush

Please do not return this product to the store.

For any questions or concerns, BISSELL is happy to be of service.

Troubleshooting – PowerForce

WARNING:

To reduce the risk of injury from moving parts, turn off vacuum cleaner and

disconnect from power outlet before performing troubleshooting steps.

Other maintenance or service not included in the manual should be

performed by an authorized service representative.

Thank you for selecting a BISSELL product.

www.bissell.com 800.237.7691

1 2 ... 8 9 10 11 12 13 14 15 16

No comments

Bissell POWERFORCE 71Y7 User's Guide Page 13