Bissell POWERFORCE 71Y7 User's Guide Page 11

  • Download
  • Add to my manuals
  • Print
  • Page
    / 16
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 10
Maintenance and care
Replace light bulb (select models)
Select models are equipped with a headlight.
Use only BISSELL Replacement Bulbs in your
BISSELL PowerForce.
1. Unplug cleaner from electrical outlet.
2. Insert a flat screwdriver or coin into
the slot on the right of the lens and
gently push inner latch to the left as
shown to remove the lens.
3. Remove the bulb from the socket by
grasping bulb and pulling straight
out. Install the new bulb by pushing
it gently into the socket until the bulb
snaps into place
4. Reposition lens, by inserting tab on
left side and then pushing the right
side back into place.
Clearing clog
The Hose on the back of the vacuum cleaner
that carries the dirt from the powerfoot to the
dust bag can sometimes become clogged.
If you notice a change in the sound of the
vacuum motor or a reduction in suction,
check for clogs.
1. Unplug cleaner from electrical outlet.
2. Pull the bag door outward to open and
set aside. Remove the dust bag to check
the suction Inlet for a clog.
3. Grasp the quick reach handle and lift
up to separate from the lower hose.
Check for a clog in the base, the wand
or the hose.
4. Release the hose from the upper portion
of the vacuum by turning to the right.
Straighten the hose and unclog with a
long, narrow object.
5. If the clog persists, turn the vacuum clean-
er OFF and unplug it. Remove the brush
cover. Check the air passageway for
obstructions. See Page 10 for instructions
on how to access the air passageway.
Remove debris from this area. Reposition
brush cover and four screws. Tighten
screws securely. Make sure end of brush
cover is snapped into place.
Air
Passageway
WARNING:
To reduce the risk of electric shock,
turn power OFF and disconnect
polarized plug from electrical out-
let before performing maintenance
or troubleshooting.
Suction Inlet
www.bissell.com 800.237.7691
11
Page view 10
1 2 ... 6 7 8 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments