Bissell OPTICLEAN User's Guide download pdf (Page 9)

Dust bag replacement

When disposing of the dust bag,

be sure to follow all steps—the

design of this dust bag allows it to

be sealed prior to removal, thus

eliminating expulsion of dust.

1. Turn the power OFF ( ). Unplug the

vacuum from the electrical outlet.

2. Disconnect the hose.

3. Open the dust bag compartment by

lifting up on the latch located at the

top of the canister, near the carrying

handle.

4. Before removing the vacuum bag, hold

the vacuum bag retainer in place and

pull up on the center tab of the bag to

seal off the dust bag.

5. Once the vacuum bag has been sealed,

remove the vacuum bag by pulling up

on the side tabs and sliding it off the

Vacuum Bag retainer. Dispose of

used bag.

NOTE: Be careful not to throw

away the plastic retainer.

6. Slide the new Vacuum Bag onto the

retainer, with the arrow pointing

downward. Make sure the hose

opening is fully exposed.

7. Ensure that the Vacuum Bag is tucked

fully inside the unit before closing the

canister housing. Press down gently on

the door until it locks into place.

NOTE: The dust bag compartment

door will not close without the

dust bag in place. Attempting to

force the door closed could result

in damage to the machine.

8. Reconnect the hose

Operations

3.

4.

5.

6.

www.bissell.com 800.237.7691

9

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments