Maintenance and care
Cleaning the Foam Post-Motor Filter
Foam
Post-Motor Filter
1. Unplug the vacuum from the
electrical outlet.
2. Lift up on both of the filter storage tabs to
open the post-motor filter compartment.
3. The Foam Post-Motor Filter is the black
filter located at the top of the compartment
door. Gently remove this filter.
4. The Foam Post-Motor Filter can be gently
cleaned by washing in warm water with
a mild detergent. Allow filter to dry
completely before reinstalling. If filter is
torn, replace with a new filter.
5. Reinstall filter. Press down on the filter
storage door and snap back into place to
close the filter compartment.
Tip:
For maximum cleaning
performance, check the filters often
and clean or replace if necessary.
WARNING:
Do not operate cleaner with
damp or wet filters or
without all filters in place.
3.
www.bissell.com 800.237.7691
12
Comments to this Manuals