Bissell Healthy Home Vacuum User's Guide download pdf (Page 10)

16

w w w . b i s s e l l . c o m

Cleaning the dirt container

Additional steps can be taken to clean the dirt

container as necessary.

1. Ensure the dirt container has been emptied.

2. Remove the lower portion by pressing the

front latch on the upper portion as shown.

3. Clean the screen with a cloth or soft brush

to remove dust or debris.

4. If desired, the lower dirt container may be

washed in warm water. Make sure it is

completely dry before reassembling. Do not

put in dishwasher.

5. To reassemble, hold the carry handle and

place the upper portion into the lower

portion, lining up the front and back latches.

Push down until both latches click into place.

Make sure the dirt container is securely

assembled before replacing it on machine.

Cleaning the pre-motor filter

The pre-motor filter should be checked monthly

and washed as needed to maintain performance.

More or less frequent cleaning may be required

based on individual vacuuming habits and types

of debris picked up .

1. The filter is located in the door labeled

"Filter" behind the dirt container. Push the

tab at the top and swing the door down to

access.

2. Remove foam filter and hold under running

water to wash. Mild detergent may also be

used if desired. Wring excess water from

filter. Air dry thoroughly before replacing.

WARNING:

Do not operate the cleaner with

damp or wet filters or without all

the filters in place.

10

Maintenance and care

WARNING:

To reduce the risk of

electric shock, turn power

switch OFF and disconnect

plug from electrical outlet

before performing

maintenance or

troubleshooting checks.

2

3

5

NOTICE:

This product is intended for

household use only and not

for commercial or industrial

use. Vacuuming of dust from

products like plaster, concrete

or ashes will damage the

motor and void the warranty.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 19 20

Comments to this Manuals

No comments