Bissell Healthy Home Vacuum User's Guide download pdf (Page 11)

w w w . b i s s e l l . c o m

11

Operations

Ready Tools™ continued

9. Clean by pressing the trigger to spray

solution onto the area to be cleaned. Slowly

move the tool back and forth over the soiled

surface. Release the trigger to suction dirty

water. Continue to clean in the area, work-

ing in small sections, until dirt is removed.

Caution: Do Not Overwet.

10. When finished cleaning, remove and rinse

tool(s) in clean, running water.

11. It is recommended that you suction clean

water from a bowl to rinse out the hose.

12. Before wrapping hose onto tool rack, lift end

of hose and stretch out to ensure all water is

cleared from hose.

13. Wrap flex hose around tool rack.

14. Empty 2-in-1 water tank and rinse out,

following instructions on pages 9 through

10.

15. If the ReadyTools dial becomes difficult to

turn, the diverter assembly that holds the

dial may need to be cleaned. To clean,

first remove nozzle and locate screw that

holds the diverter assembly in place. With a

Phillips screwdriver, remove the screw and

set aside.

16. Remove diverter assembly; hold under run-

ning water making sure water flows through

and around the dial. Turn the dial about 10

times clockwise and 10 more times counter

clockwise. This should free up any debris.

17. Wipe diverter assembly with a soft cloth and

replace back on machine. Replace nozzle.

18. Return ReadyTools dial to

FLOOR CLEANING setting.

15.

12.

16.

Screw

Run water through here

11.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments