Bissell 51C1 Series User's Guide download pdf (Page 17)

w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1

Troubleshooting

Vacuum cleaner is difficult to push

Possible causes Remedies

1. Incorrect height setting 1. Turn dial to higher setting

Visible dust escaping from cleaner

Possible causes Remedies

1. Filter door and or gasket missing 1. Check filter door and gasket

or not installed properly

2. Foam filter missing or not installed properly 2. Check foam filter for correct installation

3. HEPA filter cartridge missing or not installed properly 3. Check HEPA filter cartridge for correct installation

4. Dirt container not installed properly 4. Make sure dirt container is correctly positioned and snapped

into place

5. Dirt container not assembled properly 5. Check screen, upper and lower portions of the dirt container

for proper assembly

6. Hose not installed properly 6. Make sure hose wand is fully seated in base, and that the

hose is assembled correctly to the unit. See page 5. Also

make sure foot hose is properly attached to diverter area

7. Hole or crack in hose 7. Check hose for holes or cracks and replace if needed

Other maintenance or service not included in the manual should be

performed by an authorized service representative.

Thank you for selecting a BISSELL product.

Please do not return this product to the store.

For any questions or concerns, BISSELL is happy to be of

service. Contact us directly at 1-800-237-7691.

1 2 ... 12 13 14 15 16 17 18 19 20

No comments

Bissell 51C1 Series User's Guide Page 17