Bissell 3698E User Manual download pdf (Page 6)

6. As a final step, use “drying strokes” (by not

pressing the spray trigger) to remove as much

liquid/moisture as possible. Repeat this step as

often as necessary.

7. When using Oxygen Boost formula, it will

continue to work for the next six to eight hours

cleaning your spots and stains all the way to

the backing of the carpet.

Machine Care

1. Unplug power cable from electrical socket.

2. Empty and rinse dirty water tank after each

use, OR when dirty water reaches indicated

maximum fill line.

a. Lift tank up and away from base

of machine.

b. Pull tab to remove plug from tank

c. Rinse out tank with clean water

after emptying.

d. Disconnect cleaning tool from hose grip

by pushing down on button lock and pulling

straight off. (Do NOT twist cleaning tool to

remove it).

e. The front nozzle of the small tough stain

tool can be removed for easy cleaning. Push

button at top of cleaning tool and slide front

nozzle off top of cleaning tool. Rinse both

with clean water and replace front nozzle

back on cleaning tool. Rinse all other cleaning

tools used with clean water.

f. Check spray nozzle for accumulated dirt

or debris. If necessary, clean with soft bristle

brush.

g. The float stack can be removed from

inside dirty water tank for cleaning. Turn

locking assembly anti-clockwise to unlock

position and pull down and out of tank

to remove. Rinse with clean water until all

debris is removed. Replace float stack back

inside dirty water tank and turn locking

assembly clockwise to lock position.

Machine storage

Water and cleaning formula can be left in clean

water tank for next use.

1. Wrap power cable around cable wrap

on back of machine.

2. Wrap hose around the base of unit and

secure the hose grip.

3. Store unit in protected, dry area, at room

temperature (4° to 43°C).

Operatis

www.BISSELL.com

Mainnce & Care

WARNING

To reduce the risk of electric shock, turn power button

o and disconnect plug from electrical outlet before

performing maintenance or troubleshooting checks.

WARNING

To reduce the risk of electric shock, always install ﬂoat

stack before any wet pick-up operation.

2e. 2g.

1 2 3 4 5 6 7 8

Comments to this Manuals

No comments

Bissell 3698E User Manual Page 6

Comments to this Manuals

Related products and manuals for Special machinery Bissell 3698E