Bissell ProHeat Pro-Tech 7920 SERIES User's Guide Page 13

  • Download
  • Add to my manuals
  • Print
  • Page
    / 24
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 12
13
The Perfect Pass feature is designed to help you achieve the best
cleaning results when deep cleaning.
Apply smooth even strokes when deep cleaning your
carpets. An upright deep cleaner should not be used at
the same speed as an ordinary vacuum. That is too fast
for optimum cleaning results.
The Perfect Pass indicator displays a red light which tells
you if you are in the range of Best Cleaning or if you
are going Too Fast. If you notice consistently that the
indicator light is in the Too Fast area, slow down until
the light is in the Best Cleaning range. This will ensure
you are getting the best cleaning results.
Unplug cleaner from the outlet before attaching TurboBrush. Attach
TurboBrush to the Flex Hose by pressing tool onto the grip/trigger
until button snaps into hole. Make certain tool is securely in place.
Move the TurboBrush switch to the BRUSH position.
This activates the brush when the unit is running.
Place the tool directly on the soiled surface. Apply
downward pressure on the tool and pull towards you
while pulling trigger to spray cleaning solution.
Release the spray trigger and move the switch to the
SUCTION position. Vacuum the area until no more
cleaning solution can be removed.
Repeat steps 1-3 until no more dirt can be removed.
Caution: Do not overwet.
Disconnect the TurboBrush from the Flex Hose by pushing
down on the button lock and pulling straight off.
Once removed from the flex hose, the TurboBrush can
be cleaned.
A) Move the switch to the SUCTION” position
B) Rinse under running water.
C) Check spray nozzle for dirt. If necessary, clean with
a soft bristle brush.
D) Replace TurboBrush in its special storage
location on the handle front.
1.
2.
3.
4.
TurboBrush
Assembly and Use
When You’re Done
1.
2.
Perfect Pass
BRUSH
SUCTION
ug310-5815_7920E_604.indd 13ug310-5815_7920E_604.indd 13 3/29/06 3:39:47 PM3/29/06 3:39:47 PM
Page view 12
1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 23 24

Comments to this Manuals

No comments