Bissell POWERFORCE TURBO User's Guide download pdf (Page 10)

www.bissell.com 800.237.7691

Maintenance and care

Replacing the HEPA post-motor filter

Use only BISSELL Style 12 HEPA filter (#3205) in

your BISSELL PowerForce Turbo Bagless.

1. Unplug the cleaner from electrical outlet.

2. The HEPA post-motor filter assists in the filtra-

tion process to return clean air to the room. It

is located behind the door on the front of the

cleaner. When the filter becomes dirty, open

the door, remove the filter and replace.

Note: This filter is not washable and must be

replaced.

3. Replace the door by inserting the tabs on the left

side and snapping the right side into place.

Maintaining TurboBrush

The TurboBrush should be checked regularly for clogs

or debris wrapping around the brush roll.

1. Remove tool from hose or front of vacuum.

2. Twist collar so opening is at the top and lift top

cover to remove.

3. Remove the brush from the belt and clean debris.

4. Replace the brush inside the belt and place

ends into slots on sides.

5. Reposition top cover making sure to line up

inside tab at the front with the opening on the

cover. Twist collar until opening is at the bot-

tom to lock into place.

WARNING:

To reduce the risk of

injury from moving parts,

turn off vacuum cleaner

and disconnect Power

Plug from electrical outlet.

HEPA

Post-Motor

Filter

ug110_4018_6585_1207.indd 10ug110_4018_6585_1207.indd 10 12/19/07 10:04:57 AM12/19/07 10:04:57 AM

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16

No comments

Bissell POWERFORCE TURBO User's Guide Page 10