Bissell 20N4 User's Guide download pdf (Page 11)

16

w w w . b i s s e l l . c o m

11

Operation

Carpet cleaning (continued)

2. Remove formula tank from back of machine.

2a. Fill the formula tank by first unscrewing the

cap and insert. Always use genuine BISSELL

formulas to maximize cleaning and for the

safety of your machine. Fill water up to "WATER"

line and then fill up to "FORMULA" line with

BISSELL 2X concentrated formula. Replace the

cap and insert. Place formula tank back into the

slot in the back of the machine for a snug fit.

3. Set Custom Clean dial. Simply choose one of

the 4 settings (heavy traffic, normal clean,

light clean, or water rinse) and the ProHeat

2X will adjust the right amount of cleaning

formula to mix with the heated water to fit

your cleaning need.

4. Set ReadyTools dial to the floor cleaning setting.

5. Plug into a proper outlet and turn the power

and heater switches to the ON ( I ) position.

Allow 1 minute for the built-in heater to warm-

up before cleaning. The ProHeat 2X will be fully

warmed and will provide optimal performance

after one minute of continuous heated cleaning.

6. Cleaning strokes. While pressing the spray

trigger, make one slow forward wet pass and

another one back. Let the built-in heater, formula,

and DirtLifter PowerBrushes do the work for you.

Caution: Do not overwet. Take care not to run

over loose objects or edges of area rugs. Stalling

brush may result in premature belt failure.

Note: Your machine is equipped with a

circuit breaker that will automatically shut

off the brush if a large or loose object is

caught in the brush roll. If that happens, be

sure to unplug your machine, remove the

foreign object, and then plug the machine

back in to reset the circuit breaker.

Release the spray trigger and make one

slow forward and backward pass over

the same area to remove any residual

dirty water and aid in drying. Repeat

cleaning passes until solution being pulled

up appears clean. Continue passes without

pressing the spray trigger until you can’t see

any more water being pulled up.

FLOOR

CLEANING

2. 2a.

4.

R

I

N

S

E

W

A

T

E

R

3.

Power Switch

Heater Switch

Power Switch

Power Switch

5.

Keep plenty of genuine BISSELL

Advanced Cleaning Formulas on hand so

you can clean whenever it fits your

schedule. Always use genuine BISSELL

deep cleaning formulas. Non-BISSELL

cleaning formulas may harm the

machine and void the warranty.

WARNING:

To reduce the risk of fire and

electric shock due to internal

component damage, use only

BISSELL cleaning fluids intended

for use with the deep cleaner.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 23 24

Comments to this Manuals

No comments