Bissell 92L3 User Manual download pdf (Page 14)

www.bissell.com 800.237.7691

Maintenance and care

Replacing lightbulb

1. Unplug the vacuum from electrical outlet.

2. Using a screwdriver, first remove 2 screws

on either side of lens and pull out to remove

the lens.

3. Remove the bulb from the socket by

grasping the bulb and pulling gently. Install

the new bulb by pushing it gently into the

socket until the bulb snaps into place.

4. Reposition the lens place cover back over

headlight and reinsert 2 screws.

Maintaining TurboBrush

The TurboBrush should be checked regularly for

clogs or debris wrapping around the brush.

1. Remove tool from hose or front of vacuum.

2. Twist collar so opening is at the top and lift

top cover to remove.

3. Remove the brush from the belt and clean

debris.

4. Replace the brush inside the belt and place

ends into slots on sides as shown.

5. Reposition top cover making sure to line up

inside tab at the front with the opening on

the cover. Twist collar until opening is at the

bottom to lock into place.

ug110-4054_92L3_608.indd 14ug110-4054_92L3_608.indd 14 8/8/08 2:36:42 PM8/8/08 2:36:42 PM

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 20

No comments

Bissell 92L3 User Manual Page 14