Bissell 3750 SERIES-220-240V EN User Manual download pdf (Page 9)

w w w . b i s s e l l . c o m

Cleaning with the detachable cylinder

The detachable cylinder feature makes it possible

to easily take the powerful cleaning action of your

BISSELL Lift-Off to stairways, auto interiors, and

other hard-to-reach areas in your home.

Before detaching the cylinder, your Lift-Off must

be in its fully upright position. You do not need to

turn off the power first.

1. Press the release button at the top of the

cylinder handle and lift the cylinder to remove.

2. Detach the vacuum hose from the hose grip

base at the back of the cylinder.

3. Attach the desired tool(s) to the hose grip at

the end of the vacuum hose.

4. When you’re done, remove the tool(s) and

reconnect the hose to the hose grip base.

5. Return the cylinder to the powerfoot by aligning

the “feet” on the front with the bumps on the foot

of the upright vacuum. Push the cylinder toward

the vacuum frame until it “clicks” into place.

Shoulder strap

Select Models Only

The shoulder strap may be used while

cleaning with the detachable cylinder.

1. To attach the shoulder strap, wrap the velcro

ends attached to the bottom of the strap

securely around the cylinder handle as shown.

2. The length of the strap may be adjusted as

required for comfort.

Clean filter indicator

Select models only

The clean filter indicator tells you when airflow

in the vacuum is reduced due to dirty filters

or a clog in the hose. The clean filter indicator

will remain green until the airflow is reduced.

At that time, it begins to change to red. When it

is fully red, the airflow is significantly reduced

or blocked. Follow the steps on pages 10-11 to

clean your filter. All filters in the vacuum should

be cleaned or replaced when the clean filter

indicator turns red.

If the indicator remains red after all filters have

been cleaned, follow the steps on page 13 to

check for and clear clogs.

Operation

Release

Button

CAUTION:

Do not press the release

button while using the carrying

handle to transport the vacuum

cleaner. The cylinder could

detach causing the rest of the

vacuum to fall.

CAUTION:

While the vacuum is in use,

warm air is emitted through

the post-motor filter on the

back of the cylinder. The

bottom of the cylinder may

also become warm. When

using the shoulder strap, to

avoid discomfort, position the

cylinder so that these parts

are not directed towards or

touching your body.

NOTICE:

While vacuuming, certain

carpets and low humidity

conditions may generate small

static discharges. The

discharges

are entirely harmless and are

not associated in any way with

the main power supply.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 19 20

Comments to this Manuals

No comments

Bissell 3750 SERIES-220-240V EN User Manual Page 9

Comments to this Manuals

Related products and manuals for Vacuums Bissell 3750 SERIES-220-240V EN