Bissell 23B6-J User Manual download pdf (Page 7)

www.bissell.com

7

Operations

Getting ready

1. Attach mop pad

A. Set the mop pad flat on the floor.

B. Line up the mop head and place it

inside the mop pad with cord located at rear

of mop head. Tighten cord to ensure tight fit.

2. Fill water tank

A. Remove tank by lifting straight up and

away from the unit.

B. Unscrew cap and remove from tank.

C. Fill water tank with water. For best results,

water should be at room temperature.

D. Replace the assembly cap and tighten

until snug.

E. Replace water tank by lining up

vertical guides and gently sliding

tank into place.

3. Select a steam control setting. Light is for

delicate floors such as hardwood and lami-

nates. Normal is for everyday cleaning, and

Tough is for hard to clean messes.

4. Twist the Quick Release

™

cord wrap

clockwise to unwrap the power cord

completely and plug into a 220V-240V

grounded outlet as described on the

Important Safety Instructions, page 3.

5. The ready light will illuminate in 30 seconds

when the Lift-Off Steam Mop is ready for use.

Before you clean

Thoroughly sweep or vacuum floor prior

to cleaning with the Lift-Off Steam Mop.

Cleaning hard floors

Your Lift-Off Steam Mop is designed

to clean hard flooring such as ceramic

tile, vinyl, laminate, marble, stone and

sealed hard wood floors. Use of your

Lift-Off Steam Mop on waxed or some

unwaxed floors may result in a dimin-

ished glossiness. The Lift-Off Steam Mop

is not for use on unsealed wood floors.

For best results test in an inconspicu-

ous area and check the care instructions

from your flooring manufacturer.

2A

2B

2D

2E

1 2 3 4 5 6 7 8 9 10 11 12

Comments to this Manuals

No comments