Bissell Lift-Off User's Guide download pdf (Page 7)

7

Brush roll belt replacement:

If the brush roll belt should break, call

1.800.811.183 (for Australia inquiries),

0.800.247.735 (for New Zealand inquiries),

or visit www.BISSELL.com to purchase

replacement belt number 2031608.

Replacement instructions:

1. Turn power OFF (O). Remove foot

assembly from unit and turn over to

access the brush roll belt.

2. Remove three Phillips head screws to

remove the belt cover.

3. Locate broken belt.

4. Replace belt.

5. Place brush roll back into foot of unit.

6. Replace the belt cover and secure with

three screws.

7. Attach foot assembly on unit.

D4 Disposal of batteries

If your Lift-Off Floors & More is to be

disposed of, the batteries should be

removed and disposed of properly.

1. IMPORTANT: Unplug Charger.

2. Remove hand vac from unit and remove

dirt cup from handle.

3. Remove (5) Phillips head screws on the

handle and cover.

4. Separate left and right cover.

5. Remove the entire battery assembly from

the cover.

6. Remove (3) Phillips head screws between

the motor and battery bracket.

7. Pull the motor, PCB, fuse, and inner wire

through the middle of the battery bracket,

separating the battery bracket and single

battery from the motor, PCB, and inner wire.

8. Cut wires from the PCB and fuse to the

battery bracket.

9. Keep battery packs together – DO NOT

separate individual batteries. For proper

battery disposal instructions, please contact

your local authorities for requirements and

regulations on safe disposal or recycling

facilities in your area.

10. Discard remainder of product

CAUTION: Disconnecting the battery

will destroy the appliance and invalidate

the warranty.

7

www.BISSELL.com

1 2 3 4 5 6 7 8

Comments to this Manuals

No comments