Bissell 9500 User's Guide download pdf (Page 23)

www.bissell.com

Troubleshooting

Built-in heater ready light does not illuminate

Possible Cause Remedies

1. The heater switch is not turned ON ( I ). 1. Turn the heater switch ON ( I ).

2. The power switch is not turned ON ( I ). 2. Both switches must be ON ( I ) to

activate the heater ready light.

Reduce Spray or No Spray

Possible Cause Remedies

1. 2-in-1 water tank may be empty. 1. Fill heavy duty bladder with hand hot

tap water.

2. Formula tank may be empty. 2. Fill formula tank with BISSELL deep

cleaning formula.

3. 2-in-1 water tank may not be 3. Turn power switch OFF ( O ).

seated completely. Remove and reseat tank.

4. Pump may have lost prime. 4. Turn power switch OFF ( O ) and

then back ON ( I ). Wait one minute,

then press spray trigger.

DirtLifter PowerBrushes do not turn

Possible Cause Remedies

1. The brush belt is off or broken. 1. Turn power switch OFF ( O ) and

unplug unit from outlet. Follow

instructions on pages 21 & 22.

2. The unit is in the upright position. 2. Brushes only rotate when unit is

reclined using the detent pedal.

Circuit breaker may have tripped.

3. Turn the power switch OFF ( O ) and

unplug from outlet. Check to see if

foreign object is caught in brush roll.

Remove object. Plug machine back into

reset circuit breaker.

Scotchgard protector applicator tool is not spraying

Possible Cause Remedies

1. Cartridge is not connected to the tool 1. Follow instructions on cartridge to

assure proper fit

2. Ready Tools dial on floor setting 2. Set Ready Tools dial to tools setting

Formula clogging the spray tip

3. Soak applicator tool only in hand hot

water. Spray without the cartridge

attached to purge any residual

formula left in the applicator tool

ug120-4042_9500E.indd 23ug120-4042_9500E.indd 23 5/7/08 3:37:49 PM5/7/08 3:37:49 PM

1 2 ... 18 19 20 21 22 23 24 25 26 27 28

No comments

Bissell 9500 User's Guide Page 23