Bissell 51C1 Series User's Guide download pdf (Page 25)

Maintenance and care

To maximize your cleaning perfor-

mance and extend the life of your

vacuum, it is very important that

you empty your dirt container and

check and clean or replace your fil-

ters frequently. Perform the follow-

ing maintenance steps:

1. Empty the dirt container when the dirt

reaches the “full” line on the dirt con-

tainer, or more frequently, to prevent

overfills. For best performance, empty

after each use.

2. Check the foam motor filter and the

HEPA media filter* at least once a

month, clean or replace as needed.

3. The HEPA media filter* should be

replaced if machine performance is

noticeable declining. More or less fre-

quent replacing may be required based

on individual vacuuming habits and

types of debris picked up.

Emptying dirt container

The dirt container should be emptied

before the dirt reaches the “full” line

on the container.

1. Unplug the vacuum from electrical outlet.

2. Slide the Lock ‘n Seal lever to the

“unlock” position.

3. Grasp handle and pull the dirt container

straight out to remove from the vacuum.

4. Empty dirt into garbage container.

NOTE: Emptying the dirt container

after every use will help prevent

over filling and ensure that the

vacuum is ready to go the next

time you clean.

WARNING:

To reduce the risk of electric shock,

turn power switch OFF and dis-

connect plug from electrical outlet

before performing maintenance or

troubleshooting checks.

Tip:

For maximum cleaning

performance, check

and clean or replace

all filters as suggested.

3

*The filter, media, not the vacuum as a whole, complies

with the IEST-RP-CC001.5 HEPA Standard

www.bissell.com

8

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 31 32

Comments to this Manuals

No comments